HOME PAGEGOOSE NECK LAMPSSOCKETS, PLUGS and SWITCHESLAMP HARDWAREWIRE AND JOINERSFINIALS AND RISERSCANDLE COVERS AND BULBSINDUSTRIAL SHADES and CHAINCANOPIES, RODS, SHADE HOLDERS, LAMP ARMS, CUPS AND BOBESCHESOIL LAMPS AND THEIR RESRORATIONNEW GLASS CATALOGUELAMP SHADESCUSTOM WROUGHT IRONLAMP RESTORATIONSABOUT USMAP / DIRECTIONSCONTACT US

Please email: info@countryhouse.ca and ask for the new complete on-line lampshades catalogue to be sent asap.

THERE ARE TWO BASIC LAMP SHADE TYPES: HARDBACKED AND ALL FABRIC.

HARDBACKED HAVE FIREPROOF STYRENE LAMINATED TO THE PAPER OR FABRIC AND COME IN THE FOLLOWING SHAPES:
ROUND
SQUARE OR RECTANGULAR: SHARP OR ROUNDED CORNERS
OVAL
DOME/UMBRELLA
HEX/OCTAGONAL
HALF SHADES

BASIC ALL FABRIC STYLES:
ROUND BELL: SIMPLE BELL, DOUBLE LOWER RING, LOWER SCALLOP, BOTTOM MEDALLIONS AND DOUBLE LOWER SCALLOP.
CYLINDER: STRAIGHT, BOTTOM SCALLOP AND TOP AND BOTTOM SCALLOP.
SQUARE: CUT CORNER, SCALLOPED CORNER AND PLEATED CORNERS.
OUTSIDE SCALLOP.
PAGODA.
OVAL.
BELL WITH TOP CROWN.

Measure straight across center  for Top Diameter, repeat on the bottom ring for Bottom Diameter.  Measure from the outside edge of top ring to outside edge of bottom ring, straight down, for Side measurement.
The 'washer drop' is the depth the centre washer is below the top ring.
There are several washer types: simple washer, Uno (bridge lamp screw fitting) Euro fitting (to fit the bakelite sockets and a few other more obscure ones, please ask?

SHADES/15f001ed0.jpg
as per instructions above